Scan Stations

Scan

The scan feature is used to check out the content of stations.
The scanner will check a group of stations at a specified amount of time interval from 20 to 120 seconds. The default time interval is 30 seconds.

How to scan:

Basic:

Select a group of stations to scan. The stations can be any group or search performed.
Select the 'Start Scan' button to begin.
Once it is started, the scanner can be paused by clicking the 'Pause' button. (Formerly the 'Start' button)
When finished click the 'Close' Button

Advanced:

Select a group of stations to scan. The stations can be on any group or search performed.
Click on the 'Full' Button to expand the window Four more buttons and a list box appear
a) Set Scan Time - Sets the amount of time vTuner should scan each station
b) Move up or Move down - Prioritizes the stations to scan
c) Remove Station - Removes a selected station from the scanner
d) List box - Shows stations that have been successfully scanned.
Select the 'Start' button to begin.
When finished click the 'Close' Button